ANYCUBIC Motherboard 3D Printer TriGorilla Main board Compatible Mega 2560 & RAMPS1.4 4 Layers PCB Controller Board for RepRap
3D Printer ANYCUBIC TriGorilla Integrated Main board Compatible Mega2560 & RAMPS1.4 Combo Control Board 4 Layers PCB Controller Board for 3D Printer RepRap Mendel I3
TECHNICAL SPECIFICATION
Brand Name | ANYCUBIC |
Origin | CN(Origin) |
Item Type | Motherboard |
Model Number | 3D777 |
Name | TriGorilla Mainboard |
Type | Mainboard |
For | 3D Printer |
Compatible | Mega2560 & RAMPS1.4 |
Warranty | 6 months warranty |
Parameter:
Main Control Chip: ATMEGA256016AU
Input Power: 10V ~ 30V
Standby Current: 35mA±5mA
Stepper Motor Drivers: 5 channel Max
Hot bed Output Control: 1 channel
Heated output control: 2 channel
under-current output control: 3 channel
Dimensions: 125mm x 82mm
Features:
Simple to install:
Integrated with the mighty function of the Mega2560+ramps 1.4 kit, Great reduce the wiring problem, more convenient connection, and more stable.
Convenient to use:
TriGorilla motherboard support LCD2004 and LCD12864 without using adapter, and there are two choices for main board power supply,
you can choose DC power supply connection or directly from the terminal, it is convenient to use.
TriGorilla use CP2102 chip as a serial port communication, communication not only stable,
but also avoid the repeated to install the driver(There will be increased “COM” port when replacing the traditional 2560 board,
so while those people who need to batch purchasing test, the “COM” increases to a certain value will lead to can’t upload the firmware problem.)
Excellent compatibility:
Firmware can use the same configuration as ramps1.4, the marlin firmware which runs in Mega2560+ramps 1.4 kits can directly running in TriGorilla board.
Voltage input at super wide range, short-circuit protection:
TriGorilla adopts DC - DC step-down scheme design and Recoverable fuse for short-circuit protection, improving the MEGA2560 board serious heating problem,
Allowing any power supply from 10V-30V.
Support up to 5 motor drivers, support A4988/ DRV8825 /TMC2100 driver:
Motor drive circuit doesn't integration on the circuit board. You can change any stepper motor driver you need, easier to operate.
(Support A4988/ DRV8825 /TMC2100 driver)
Rich expansion port
TriGorilla had reserved SERVO, UART, IIC expansion, so you can use it realize automatic leveling, control touch screen smart controller,
control wireless module and the detection of break, etc
Wide applicability
widely used in 3D printers, e.g. Kossel, Prusa i3, corexy, etc
Instructions:
Power port:
As picture below, there are two choices for motherboard power supply, choose one of them according to you need